Call settings
Send my caller ID
—You can set your phone number to be
displayed to (
Yes
) or hidden from (
No
) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(
Set by network
) (network service).
Call waiting
—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
Tools
90
Copyright © 2006 Nokia. All rights reserved.
(
Activate
) or off (
Cancel
), or check whether the function
is activated (
Check status
).
Reject call with SMS
—To send a text message to a caller
informing why you could not answer the call, select
Yes
.
See ‘Answer or reject a call’, p. 55.
Message text
—Write a text to be sent in a text message
when you reject a call.
Image in video call
—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Automatic redial
—To set your device to make a maximum
of 10 attempts to connect the call after an unsuccessful
call attempt. To stop automatic redialing, press
.
Summary after call
—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialling
—To dial numbers assigned to the speed
dialing keys (
-
) press and hold the key. See also
‘Speed dial a phone number’, p. 50.
Anykey answer
—To answer an incoming call, by pressing
any
key
except , , ,
and ,
select
On
.
Line in use
—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change
—To prevent line selection (network service),
select
Disable
if supported by your SIM card. To change
this setting, you need the PIN2 code.