Security
Phone and SIM
PIN code request
—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See ‘Glossary of PIN
and lock codes’, p. 13.
PIN code
,
PIN2 code
, and
Lock code
—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 13.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period
—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select
None
.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
. A list of
commands opens. Select
Lock phone
.
Lock if SIM changed
—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group
—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls still may
be possible to the official emergency number programmed
into your device.
Confirm SIM services
—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
Tools
94
Copyright © 2006 Nokia. All rights reserved.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile devices.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certif. management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press
to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate
or
Certificate not valid yet
is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
View certificate details
Tools
95
Copyright © 2006 Nokia. All rights reserved.
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select
Options
>
Certificate details
. When you open
certificate details, the validity of the certificate is
checked, and one of the following notes may be displayed:
Certificate not trusted
—You have not set any application
to use the certificate. See ‘Change the trust settings’, p.
15.
Expired certificate
—The period of validity has ended for
the selected certificate.
Certificate not valid yet
—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted
—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select
Options
>
Trust settings
. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
Symbian installation
:
Yes
—The certificate is able to
certify the origin of a new Symbian operating system
application.
Internet
>
Yes
—The certificate is able to certify servers.
App. installation
>
Yes
—The certificate is able to certify
the origin of a new Java
TM
application.
Select
Options
>
Edit trust setting
to change the value.
Track protect. object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.